SUBSCRIBE TO FAME CHeRRy

Enter your email address:

Delivered by FeedBurner

Our Youtube Channel

Home » OWC MAC PRO SSD » Mac Pro 2013 SSD Malaysia OWC Aura Pro X2 NVMe Malaysia

Mac Pro 2013 SSD Malaysia OWC Aura Pro X2 NVMe Malaysia

Mac Pro 2013 SSD Malaysia. High performance NVMe flash upgrade for Mac Pro (Late 2013), including tools & heatsink. Read speeds up to 1534MB/s.

OWC Aura Pro X2 Malaysia NVMe SSD Hard Disk Drive for Mac Pro 2013

240 GB – MYR 499.99

480 GB- MYR 699.99

1.0 TB – MYR 999.99

2.0 TB – MYR 1819.99

 

5 Year OWC Limited Warranty

2 TB
  • High performance for high demands
  • Read speeds up to 1534MB/s
  • Write speeds up to 1353MB/s
  • Consumes less power and runs cooler
  • Designed for macOS 10.13 and beyond
  • NVMe – PCIe 3.1 x4
 
1 TB
  • High performance for high demands
  • Read speeds up to 1536MB/s
  • Write speeds up to 1354MB/s
  • Consumes less power and runs cooler
  • Designed for macOS 10.13 and beyond
  • NVMe – PCIe 3.1 x4
 
480 GB
  • High performance for high demands
  • Read speeds up to 1549MB/s
  • Write speeds up to 1351MB/s
  • Consumes less power and runs cooler
  • Designed for macOS 10.13 and beyond
  • NVMe – PCIe 3.1 x4
 
240 GB
  • High performance for high demands
  • Read speeds up to 1565MB/s
  • Write speeds up to 1206MB/s
  • Consumes less power and runs cooler
  • Designed for macOS 10.13 and beyond
  • NVMe – PCIe 3.1 x4
Your Mac. More Space. Twice as Fast.
Keep On Innovating
Tight deadlines, long nights, and terabytes of media – your Mac has been with you through it all. If storage is tight, there’s no reason to ditch the Mac you know and love. The Aura® Pro X2 SSD gives you up to 16 times more space and the speed to keep up with your imagination today and tomorrow. Upgrade your Mac with Aura Pro X2 SSD for a fraction of the cost of a new model and keep your Mac running for years.
Blazing Fast and Super Cool
Aura Pro X2 combines speed, stamina, and efficiency that will change the way you experience your Mac. With read speeds reaching 1534MB/s and write speeds of 1353MB/s, the 2.0TB Aura Pro X2 is up to twice as fast as the original SSDs, delivering performance on par with the latest models. It runs cooler and consumes less power than earlier SSD models, so you can run at peak for longer than ever.
Maintain Your Edge
When it’s go time, getting off the line and maintaining a high level of performance are equally important. Aura Pro X2 is engineered with advanced SLC caching, providing instant full-speed write acceleration, meaning those media projects and games stream fluidly and respond without lag time. You might even forget what that beachball looks like.
Continuous Compatibility
Aura Pro X2 is designed for the latest macOS versions (macOS High Sierra 10.13 and later), taking full advantage of the advanced features of APFS including: strong encryption, copy-on-write metadata, space sharing, cloning for files and directories, snapshots, fast directory sizing, atomic safe-save primitives, and improved file system fundamentals.
Right-Sized for Work and Play
The smaller stock SSDs for Mac can fill up quickly, especially with photo and video files, games, or even your email. Aura Pro X2 SSDs are available in capacities up to 2TB, giving you more space to work and play. Newly calibrated to use less power and run cooler, Aura Pro X2 is the best way to upgrade your PCIe equipped Mac.
No Hassles or Hacks Compatibility
Aura Pro X2 PCIe-based flash storage upgrades are precisely engineered for your Mac laptop, so you’ll never need to compromise your data by relying on complicated software hacks or TRIM-enablers to get the most from your upgrade. Just install, migrate your data, and enjoy the great performance of flash storage with up to 16 times the capacity of the factory-installed drive.
7% Over Provisioning
OWC SSDs perform maintenance tasks in the background that optimize the health, performance, and endurance of your flash drive. These jobs take advantage of available, unwritten areas on the SSD. Aura Pro X2 PCIe-based flash storage reserves 7% of the overall capacity as free space. Always. With this allocated free space, Aura SSDs can perform these normal maintenance tasks making your drive more stable, dependable, and ultimately a safer place to store your data.
Quality That Lasts
Aura Pro X2 SSDs are proudly designed in Austin and are backed by a lifetime of free, award-winning USA-based support.

2.0TB Aura Pro X2 SSD for Mac Pro (Late 2013) Specifications:

Specifications

Controller
Silicon Motion SM2262EN Series Processor with 7% over-provisioning
NAND
3D TLC Synchronous NAND Flash
Form Factor
Custom blade
Interface
PCIe 3.1 x4, NVMe 1.3
Capacity
1920GB useable capacity
Total Flash Memory Components: 2048GB
128 GB Allocated to real-time data redundancy and error correction
Formatted Capacity
1788GiB
Native Command Queuing
up to 32 commands
Manufacturer Model Number
OWCS3DAPT4MP20P
OS Requirements
macOS 10.13 High Sierra or later
Host Requirements
Must upgrade to macOS 10.13 or later, prior to installation
RoHS Compliant
Yes
Format
 

Physical

Height (max)
2.6mm (0.102″)
Width (max)
22.0mm (0.866″)
Length (max)
89.0mm (3.504″)
Weight
8.0g (0.28oz)
 

Reliability

MTBF (Mean Time Between Failures)
1,500,000
Data Reliability
ECC Recovery
Endurance
900TB total bytes written (TBW)
TRIM Support
OS Dependent
 

Performance

Average Access Time
<0.1 ms
Sequential Read (Max)
up to 1534MB/s
Sequential Write (Max)
up to 1353MB/s
 

Power

Read Power
5.7 W
Write Power
5.7 W
Seek Power
5.7 W
Idle Power
0.3 W
 

Environmental (Operating)

Relative Humidity (non-condensing)
5% to 95%
Temperature (°F)
32°F to 158°F
Temperature (°C)
0°C to 70°C
 

Environmental (Non-Operating)

Shock
1500G / 0.5ms
Temperature (°F)
-40°F to 185°F
Temperature (°C)
-40°C to 85°C
 

Acoustics

Idle (Typical)
0.0 bels
Seek (Typical)
0.0 bels
 
 

Notes

  • The Aura Pro X2 is a high performance PCIe 3.1 x4 NVMe SSD capable of performing in excess of 3000MB/s in Macs with PCIe3.0 x4 SSD slot. Performance can vary depending on many factors, including the Mac model and its drive bus specifications. Please check the compatibility section and the detailed specs for your Mac model’s drive bus specifications.
  • Sequential read/write (max) performance numbers are based on testing with AJA System Test (4K-Full resolution, 64GB file size, 16bit RGBA codec) on a 2013 Mac Pro (MacPro6,1).
  • When upgrading from an AHCI SSD used in some older Mac models (2013-2014), you may observe a slight increase in boot times. Read the Knowledge Base article to learn more.
 
 
Manufacturer provided specifications for Other World Computing p/n S3DAPT4MP20P UPC#: 810586032087

1.0TB Aura Pro X2 SSD for Mac Pro (Late 2013) Specifications:

Specifications

Controller
Silicon Motion SM2262EN Series Processor with 7% over-provisioning
NAND
3D TLC Synchronous NAND Flash
Form Factor
Custom blade
Interface
PCIe 3.1 x4, NVMe 1.3
Capacity
960GB useable capacity
Total Flash Memory Components: 1024GB
64 GB Allocated to real-time data redundancy and error correction
Formatted Capacity
894GiB
Native Command Queuing
up to 32 commands
Manufacturer Model Number
OWCS3DAPT4MP10P
OS Requirements
macOS 10.13 High Sierra or later
Host Requirements
Must upgrade to macOS 10.13 or later, prior to installation
RoHS Compliant
Yes
Format
 

Physical

Height (max)
2.6mm (0.102″)
Width (max)
22.0mm (0.866″)
Length (max)
89.0mm (3.504″)
Weight
8.0g (0.28oz)
 

Reliability

MTBF (Mean Time Between Failures)
1,500,000
Data Reliability
ECC Recovery
Endurance
450TB total bytes written (TBW)
TRIM Support
OS Dependent
 

Performance

Average Access Time
<0.1 ms
Sequential Read (Max)
up to 1536MB/s
Sequential Write (Max)
up to 1354MB/s
 

Power

Read Power
5.7 W
Write Power
5.7 W
Seek Power
5.7 W
Idle Power
0.3 W
 

Environmental (Operating)

Relative Humidity (non-condensing)
5% to 95%
Temperature (°F)
32°F to 158°F
Temperature (°C)
0°C to 70°C
 

Environmental (Non-Operating)

Shock
1500G / 0.5ms
Temperature (°F)
-40°F to 185°F
Temperature (°C)
-40°C to 85°C
 

Acoustics

Idle (Typical)
0.0 bels
Seek (Typical)
0.0 bels
 
 

Notes

  •  
  • The Aura Pro X2 is a high performance PCIe 3.1 x4 NVMe SSD capable of performing in excess of 3000MB/s in Macs with PCIe3.0 x4 SSD slot. Performance can vary depending on many factors, including the Mac model and its drive bus specifications. Please check the compatibility section and the detailed specs for your Mac model’s drive bus specifications.
  • Sequential read/write (max) performance numbers are based on testing with AJA System Test (4K-Full resolution, 64GB file size, 16bit RGBA codec) on a 2013 Mac Pro (MacPro6,1).
  • When upgrading from an AHCI SSD used in some older Mac models (2013-2014), you may observe a slight increase in boot times. Read the Knowledge Base article to learn more.
 
 

Manufacturer provided specifications for Other World Computing p/n S3DAPT4MP10P UPC#: 810586032070

480GB Aura Pro X2 SSD for Mac Pro (Late 2013) Specifications:

Specifications

Controller
Silicon Motion SM2262EN Series Processor with 7% over-provisioning
NAND
3D TLC Synchronous NAND Flash
Form Factor
Custom blade
Interface
PCIe 3.1 x4, NVMe 1.3
Capacity
480GB useable capacity
Total Flash Memory Components: 512GB
32 GB Allocated to real-time data redundancy and error correction
Formatted Capacity
447GiB
Native Command Queuing
up to 32 commands
Manufacturer Model Number
OWCS3DAPT4MP05P
OS Requirements
macOS 10.13 High Sierra or later
Host Requirements
Must upgrade to macOS 10.13 or later, prior to installation
RoHS Compliant
Yes
Format
 

Physical

Height (max)
2.6mm (0.102″)
Width (max)
22.0mm (0.866″)
Length (max)
89.0mm (3.504″)
Weight
8.0g (0.28oz)
 

Reliability

MTBF (Mean Time Between Failures)
1,500,000
Data Reliability
ECC Recovery
Endurance
225TB total bytes written (TBW)
TRIM Support
OS Dependent
 

Performance

Average Access Time
<0.1 ms
Sequential Read (Max)
up to 1549MB/s
Sequential Write (Max)
up to 1351MB/s
 

Power

Read Power
5.7 W
Write Power
5.7 W
Seek Power
5.7 W
Idle Power
0.3 W
 

Environmental (Operating)

Relative Humidity (non-condensing)
5% to 95%
Temperature (°F)
32°F to 158°F
Temperature (°C)
0°C to 70°C
 

Environmental (Non-Operating)

Shock
1500G / 0.5ms
Temperature (°F)
-40°F to 185°F
Temperature (°C)
-40°C to 85°C
 

Acoustics

Idle (Typical)
0.0 bels
Seek (Typical)
0.0 bels
 
 

Notes

  • The Aura Pro X2 is a high performance PCIe 3.1 x4 NVMe SSD capable of performing in excess of 3000MB/s in Macs with PCIe3.0 x4 SSD slot. Performance can vary depending on many factors, including the Mac model and its drive bus specifications. Please check the compatibility section and the detailed specs for your Mac model’s drive bus specifications.
  • Sequential read/write (max) performance numbers are based on testing with AJA System Test (4K-Full resolution, 64GB file size, 16bit RGBA codec) on a 2013 Mac Pro (MacPro6,1).
  • When upgrading from an AHCI SSD used in some older Mac models (2013-2014), you may observe a slight increase in boot times. Read the Knowledge Base article to learn more.
 
 

Manufacturer provided specifications for Other World Computing p/n S3DAPT4MP05P UPC#: 810586032063

240GB Aura Pro X2 SSD for Mac Pro (Late 2013) Specifications:

Specifications

Controller
Silicon Motion SM2262EN Series Processor with 7% over-provisioning
NAND
3D TLC Synchronous NAND Flash
Form Factor
Custom blade
Interface
PCIe 3.1 x4, NVMe 1.3
Capacity
240GB useable capacity
Total Flash Memory Components: 256GB
16 GB Allocated to real-time data redundancy and error correction
Formatted Capacity
223.5GiB
Native Command Queuing
up to 32 commands
Manufacturer Model Number
OWCS3DAPT4MP02P
OS Requirements
macOS 10.13 High Sierra or later
Host Requirements
Must upgrade to macOS 10.13 or later, prior to installation
RoHS Compliant
Yes
Format
 

Physical

Height (max)
2.6mm (0.102″)
Width (max)
22.0mm (0.866″)
Length (max)
89.0mm (3.504″)
Weight
8.0g (0.28oz)
 

Reliability

MTBF (Mean Time Between Failures)
1,500,000
Data Reliability
ECC Recovery
Endurance
150TB total bytes written (TBW)
TRIM Support
OS Dependent
 

Performance

Average Access Time
<0.1 ms
Sequential Read (Max)
up to 1565MB/s
Sequential Write (Max)
up to 1206MB/s
 

Power

Read Power
5.7 W
Write Power
5.7 W
Seek Power
5.7 W
Idle Power
0.3 W
 

Environmental (Operating)

Relative Humidity (non-condensing)
5% to 95%
Temperature (°F)
32°F to 158°F
Temperature (°C)
0°C to 70°C
 

Environmental (Non-Operating)

Shock
1500G / 0.5ms
Temperature (°F)
-40°F to 185°F
Temperature (°C)
-40°C to 85°C
 

Acoustics

Idle (Typical)
0.0 bels
Seek (Typical)
0.0 bels
 
 

 

  • The Aura Pro X2 is a high performance PCIe 3.1 x4 NVMe SSD capable of performing in excess of 3000MB/s in Macs with PCIe3.0 x4 SSD slot. Performance can vary depending on many factors, including the Mac model and its drive bus specifications. Please check the compatibility section and the detailed specs for your Mac model’s drive bus specifications.
  • Sequential read/write (max) performance numbers are based on testing with AJA System Test (4K-Full resolution, 64GB file size, 16bit RGBA codec) on a 2013 Mac Pro (MacPro6,1).
  • When upgrading from an AHCI SSD used in some older Mac models (2013-2014), you may observe a slight increase in boot times. Read the Knowledge Base article to learn more.
 
 

Manufacturer provided specifications for Other World Computing p/n S3DAPT4MP02P UPC#: 810586032056

Note: Click here for details on macOS Sleep- and Standby-related behaviors.
This product is compatible with…Learn how to find your Mac’s model ID
 
Mac Pro
Mac Pro
(December, 2013)
Model ID: MacPro6,1
2.7GHz 3.0GHz, 3.5GHz, 3.7GHz

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

  

  

  

This site uses Akismet to reduce spam. Learn how your comment data is processed.